PDS_VERSION_ID                   = PDS3
LABEL_REVISION_NOTE              = "S. SLAVNEY, 2010-04-22"
RECORD_TYPE                      = STREAM

OBJECT                           = DATA_SET
 DATA_SET_ID                     = "MGS-M-MOLA-5-IEGDR-L3-V2.0"

 OBJECT                          = DATA_SET_INFORMATION
  DATA_SET_NAME                  = "MOLA INITIAL EXPERIMENT GRIDDED DATA 
                                   RECORD"
  DATA_SET_COLLECTION_MEMBER_FLG = "N"
  START_TIME                     = 1997-09-15T19:10:00.000
  STOP_TIME                      = 2000-06-02T16:51:07.180
  DATA_OBJECT_TYPE               = FILE
  DATA_SET_RELEASE_DATE          = 2007-10-12
  PRODUCER_FULL_NAME             = {"DAVID E. SMITH", "MARIA T. ZUBER",
                                    "GREGORY A. NEUMANN"}
  DETAILED_CATALOG_FLAG          = "N"
  DATA_SET_DESC                  = "

  Data Set Overview
  =================
   The Mars Global Surveyor (MGS) spacecraft included a laser altimeter
   instrument. The primary objective of the Mars Orbiter Laser
   Altimeter (MOLA) is to determine globally the topography of Mars at
   a level suitable for addressing problems in geology and geophysics.

   This data set is a topographic
   map of Mars at various resolutions, based on 
   altimetry data acquired by the Mars Global Surveyor MOLA 
   instrument and accumulated over the course of the mission so far. 
   The MOLA Precision Experiment Data Records (PEDRs) are the source
   for this data set. The map is in the form of an ASCII table with 
   one row for each latitude-longitude bin, from 90 to 
   -90 degrees latitude and from 0 to 360 degrees longitude. 
   
   Note that MOLA uses a different orbit numbering scheme from that
   used by the MGS Project. The Project reset its orbit counter to 1 at
   the beginning of the Mapping Phase. Since MOLA had already generated
   products identified by orbit number prior to the Mapping Phase, it
   was decided to use the Project orbit number plus 10000 to identify
   MOLA Mapping Phase products, thereby avoiding duplicate product IDs.
   Subtract 10000 from a MOLA mapping phase orbit number to determine
   the equivalent MGS Project orbit number. Since the MOLA topographic
   data are cumulative over the whole mission, the orbit number range
   for these products spans both the Orbit Insertion and Mapping
   Phases."
   
  CONFIDENCE_LEVEL_NOTE           = "N/A"

 END_OBJECT                      = DATA_SET_INFORMATION

 OBJECT                          = DATA_SET_TARGET
  TARGET_NAME                    = MARS
 END_OBJECT                      = DATA_SET_TARGET

 OBJECT                          = DATA_SET_HOST
  INSTRUMENT_HOST_ID             = MGS
  INSTRUMENT_ID                  = MOLA
 END_OBJECT                      = DATA_SET_HOST

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "ABSHIREETAL2000"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION
 
 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "AFZALETAL1997"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "DAVIESETAL1996"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "IVANOV&MUHLEMAN1998"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "LEMOINEETAL2001"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "MOLAPEDRSIS2003"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION
 
 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "NEUMANNETAL2001"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION
 
 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "NEUMANNETAL2003"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION
 
 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "SEIDELMANNETAL2002"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "SMITH&ZUBER1998"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "SMITHETAL1998"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "SMITHETAL1999"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "SMITHETAL2001A"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "SMITHETAL2001B"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "WU1991"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "ZEITLER&OBERST1999"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

 OBJECT                          = DATA_SET_REFERENCE_INFORMATION
  REFERENCE_KEY_ID               = "ZUBERETAL1992"
 END_OBJECT                      = DATA_SET_REFERENCE_INFORMATION

END_OBJECT                       = DATA_SET

END