PDS_VERSION_ID                    = PDS3

/* Identification data elements that apply to all referenced data files */
DATA_SET_ID                       = "MRO-M-SHARAD-3-EDR-V1.0"
PRODUCT_ID                        = "E_5225701_001_SS19_700_A"
RELEASE_ID                        = "0045"
PRODUCT_TYPE                      = EDR
INSTRUMENT_HOST_ID                = MRO
INSTRUMENT_HOST_NAME              = "MARS RECONNAISSANCE ORBITER"
INSTRUMENT_ID                     = SHARAD
INSTRUMENT_NAME                   = "SHALLOW RADAR"
INSTRUMENT_TYPE                   = RADAR
TARGET_NAME                       = MARS
MISSION_PHASE_NAME                = "EXTENDED SCIENCE PHASE"
ORBIT_NUMBER                      = 52257
MRO:START_SUB_SPACECRAFT_LATITUDE = -3.58077113727 <DEGREE>
MRO:STOP_SUB_SPACECRAFT_LATITUDE  = -12.8381730041 <DEGREE>
MRO:START_SUB_SPACECRAFT_LONGITUDE= 279.99831663 <DEGREE>
MRO:STOP_SUB_SPACECRAFT_LONGITUDE = 278.855163371 <DEGREE>
START_TIME                        = 2017-262T08:28:27.826
STOP_TIME                         = 2017-262T08:31:20.592
SPACECRAFT_CLOCK_START_COUNT      = "17/1190276954.135"
SPACECRAFT_CLOCK_STOP_COUNT       = "17/1190277127.075"
PRODUCT_CREATION_TIME             = 2018-148T11:24:02.000
PRODUCT_VERSION_ID                = "A"
PRODUCT_VERSION_TYPE              = RECONSTRUCTED

OBJECT                       = FILE

/* File characteristic data elements */
  RECORD_TYPE                  = FIXED_LENGTH
  RECORD_BYTES                 = 3786
  FILE_RECORDS                 = 30246

/* Data object pointers */
  ^SCIENCE_TELEMETRY_TABLE     = "E_5225701_001_SS19_700_A_S.DAT"

/* Identification data elements */
  SOURCE_PRODUCT_ID            = {
"4A_07_00CC211000_01.DAT",
"4A_07_00CC211100_01.DAT"}

/* Descriptive data elements */
  INSTRUMENT_MODE_ID            = SS19
  INSTRUMENT_MODE_DESC          = "In this mode the instrument performs
                                   scientific measurements by transmitting
                                   radar pulses and collecting, processing
                                   and formatting received echoes. Data
                                   processing performed on-board consists
                                   in summing 04 sequential echoes, and
                                   converting the result from 32-bit
                                   precision to 08-bit precision."
  MRO:PULSE_REPETITION_INTERVAL = 1428 <MICROSECOND>
  MRO:PHASE_COMPENSATION_TYPE   = "NO COMPENSATION"
  MRO:MANUAL_GAIN_CONTROL       = 10
  MRO:COMPRESSION_SELECTION_FLAG= "STATIC"
  MRO:CLOSED_LOOP_TRACKING_FLAG = "DISABLED"
  DATA_QUALITY_ID               = "0"
  DATA_QUALITY_DESC             = "0:no corrupted data 
                                   1:less than 2% corrupted data 
                                   2:less than 5% corrupted data 
                                   3:less than 10% corrupted data 
                                   4:more than 10% corrupted data"

/* Data object definitions */
  OBJECT                       = SCIENCE_TELEMETRY_TABLE
    INTERCHANGE_FORMAT           = BINARY
    COLUMNS                      = 39
    ROW_BYTES                    = 3786
    ROWS                         = 30246
    DESCRIPTION                  = "Binary table containing raw science
                                    telemetry packets generated by SHARAD,
                                    called blocks, collected continuously
                                    using the same operation mode, instrument
                                    status and on-board processing scheme.
                                    Each data block is a sequence of time
                                    samples of a received signal, preceded by
                                    a header containing information on the
                                    collection and on-board processing of the
                                    data. In the table, each line contains
                                    data from a single data block, and each
                                    column contains the value of a single
                                    parameter or time sample across different
                                    data blocks."
    ^STRUCTURE                   = "SCIENCE8BIT.FMT"
    PRIMARY_KEY                  = ("SCET_BLOCK_WHOLE","SCET_BLOCK_FRAC")
    START_PRIMARY_KEY            = (1190276954,37913)
    STOP_PRIMARY_KEY             = (1190277127,22574)
  END_OBJECT                   = SCIENCE_TELEMETRY_TABLE

END_OBJECT                   = FILE

OBJECT                       = FILE

/* File characteristic data elements */
  RECORD_TYPE                  = FIXED_LENGTH
  RECORD_BYTES                 = 267
  FILE_RECORDS                 = 30246

/* Data object pointers */
  ^AUXILIARY_DATA_TABLE        = "E_5225701_001_SS19_700_A_A.DAT"

/* Identification data elements */
SPICE_FILE_NAME= {
"RM284.mk",
"mro_psp42.bsp",
"mro_psp43.bsp",
"mro_psp44.bsp",
"mro_psp45.bsp",
"mro_hga_psp_170912_170918.bc",
"mro_hga_psp_170919_170925.bc",
"mro_hga_psp_170926_171002.bc",
"mro_sa_psp_170912_170918.bc",
"mro_sa_psp_170919_170925.bc",
"mro_sa_psp_170926_171002.bc",
"mro_sc_psp_170912_170918.bc",
"mro_sc_psp_170919_170925.bc",
"mro_sc_psp_170926_171002.bc",
"mro_sclkscet_00066_65536.tsc",
"naif0012.tls",
"de421.bsp",
"mro_lvlh_fb_v3.tf",
"mro_v15.tf",
"pck00008.tpc"}

/* Data object definitions */
  OBJECT                       = AUXILIARY_DATA_TABLE
    INTERCHANGE_FORMAT           = BINARY
    COLUMNS                      = 38
    ROW_BYTES                    = 267
    ROWS                         = 30246
    DESCRIPTION                  = "Binary table listing geometric quantities
                                    generated on-ground from spacecraft
                                    navigation data, parameters extracted from
                                    instrument and spacecraft housekeeping
                                    telemetry, and flags describing the
                                    completeness and usability of scientific
                                    data. This table is associated to a binary
                                    file containing instrument science
                                    telemetry, and contains one line for each
                                    line in the science telemetry binary
                                    table."
    ^STRUCTURE                   = "AUXILIARY.FMT"
    PRIMARY_KEY                  = ("SCET_BLOCK_WHOLE","SCET_BLOCK_FRAC")
    START_PRIMARY_KEY            = (1190276954,37913)
    STOP_PRIMARY_KEY             = (1190277127,22574)
  END_OBJECT                   = AUXILIARY_DATA_TABLE

END_OBJECT                   = FILE

END