2001-11-21T16:30:25.000
\header
System               = GRS
Author               = mward
Institution          = UofAz
Start_time           = 11/21/01 18:30
Stop_time            = 11/21/01 22:30
Send_time            = Wed Nov 21 16:30:25 GMT 2001
\text
Purpose:
Change the GRS EEPROM sequence 1B to exclude the GPA temperature control 
Expected result:
The GRS EEPROM sequence will be replaced
Why it is needed:
The GPA sensor is only valid when the gamma subsystem is on
Commands to be sent:
/home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_s01b_startup_htr_
 3101,    immediate, CHG_SEQ, 120, B-1, 10
 0:    immediate, OP_HTR, OFF, 0
 1:    immediate, CHG_ANALOG, CEB_MNT_RNG_TEMP_A, LESS_COMPARE_VALUE, 2351, 0
 2:    immediate, CHG_ANALOG, CEB_MNT_RNG_TEMP_A, GREATER_COMPARE_VALUE, 2554,
 3:    immediate, CHG_ANALOG, CEB_MNT_RNG_TEMP_A, OUT_OF_RANGE, 2, 0
 4:    immediate, CHG_ANALOG, CEB_MNT_RNG_TEMP_A, COLLECTION, 6, 0
 5: +    0-1    , EXEC_SEQ, 15, 1, 0
 6: +    0-4    , DUMP_FPGA_REGS, 0, 0
 7: +    0-7    , DUMP_FPGA_REGS, 1, 0
 8: +    0-10   , DUMP_ANALOG, 0
 9: +    0-13   , DUMP_PARAMS, 0 DUMP_SEQ, 43, 0
 1172, +    0-51   , DUMP_SEQ, 22, 1
 1173, +    0-54   , DUMP_SEQ, 23, 1
 1174, +    0-57   , DUMP_SEQ, 24, 1
 1175, +    0-60   , DUMP_SEQ, 25, 1
 1176, +    0-63   , DUMP_SEQ, 26, 1
 1177, +    0-66   , DUMP_SEQ, 27, 1
 1178, +    0-69   , DUMP_SEQ, 28, 1
 1179, +    0-72   , DUMP_SEQ, 29, 1
 1180, +    0-75   , DUMP_SEQ, 30, 1
 1183, +    0-78   , DUMP_SEQ, 33, 1
 1184, +    0-81   , DUMP_SEQ, 34, 1
 1185, +    0-84   , DUMP_SEQ, 35, 1
 1186, +    0-87   , DUMP_SEQ, 36, 1
 1187, +    0-90   , DUMP_SEQ, 37, 1
 1188, +    0-93   , DUMP_SEQ, 38, 1
 1189, +    0-96   , DUMP_SEQ, 39, 1
 1190, +    0-99   , DUMP_SEQ, 40, 1
 1191, +    0-102  , DUMP_SEQ, 41, 1
 1192, +    0-105  , DUMP_SEQ, 42, 1
 1193, +    0-108  , DUMP_SEQ, 43, 1
 1194, +    0-111  , DUMP_SEQ, 44, 1
 1352, +    0-114  , DUMP_ANALOG
 1353, +    0-117  , DUMP_PARAMS
 1355, +    0-120  , DUMP_FPGA_REGS, 0
 1356, +    0-123  , DUMP_FPGA_REGS, 1
 1363, +    0-126  , DUMP_COUNTS
2001-11-21T16:32:10.000
\header
System               = GRS
Author               = mward
Institution          = UofAz
Start_time           = 11/21/01 18:30
Stop_time            = 11/21/01 22:30
Send_time            = Wed Nov 21 16:32:10 GMT 2001
\text
Purpose:
Change the GRS EEPROM sequence 11B to include the NS data collection first 
Expected result:
The GRS EEPROM sequence will be replaced
Why it is needed:
To avoid turning on NS without collecting NS engineering data
Commands to be sent:
/home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_s11b_lanl_low_vol
 3111,    immediate, CHG_SEQ, 72, B-11, 6
 0:    immediate, EXEC_SEQ, 15, 0, 0
 1: +    0-1    , CHG_PARAM, SEND_LANL_REGS, 1, 0
 2: +    0-1    , CHG_STATE, LANL, ON, 0
 3: +    0-1    , CHG_CLCT, LANL, ON, 0
 4: +    0-2    , LANL_RUN, ON, 0
 5: +    0-4    , LANL_ALL_PRISM, 0, 0
2001-11-21T16:33:14.000
\header
System               = GRS
Author               = mward
Institution          = UofAz
Start_time           = 11/21/01 18:30
Stop_time            = 11/21/01 22:30
Send_time            = Wed Nov 21 16:33:14 GMT 2001
\text
Purpose:
Change the GRS EEPROM sequence 29B to include the NS data collection first 
Expected result:
The GRS EEPROM sequence will be replaced
Why it is needed:
To avoid turning on NS without collecting NS engineering data
Commands to be sent:
/home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_s29b_lanl_nominal
 3129,    immediate, CHG_SEQ, 96, B-29, 8
 0:    immediate, EXEC_SEQ, 15, 0, 0
 1: +    0-1    , CHG_PARAM, SEND_LANL_REGS, 1, 0
 2: +    0-1    , CHG_STATE, LANL, ON, 0
 3: +    0-1    , CHG_CLCT, LANL, ON, 0
 4: +    0-2    , LANL_RUN, ON, 0
 5: +    0-4    , LANL_ALL_PRISM, 0, 0
 6: +    0-4    , LANL_HVPS_CNTL, 2, 7, 0
 7: +    0-4    , LANL_HVPS, 2, ON, 0
2001-11-21T21:36:13.000
\header
System               = GRS
Author               = mward
Institution          = UofAz
Start_time           = 11/21/01 20:00
Stop_time            = 11/21/01 22:30
Send_time            = Wed Nov 21 21:36:13 GMT 2001
\text
Purpose:
To verify that GRS EEPROM sequences 1b, 11b, and 29b are populated correctly.
Expected result:
Expect to receive a dump of the contents of GRS EEPROM sequences 1b, 11b, and
Why it is needed:
To clean up GRS EEPROM sequences (1B remove GPA autonomous heater control, 11b
Commands to be sent:
/home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_dump_test_10.bcf
 1151,    immediate, DUMP_SEQ, 1, 1
 1161, +    0-3    , DUMP_SEQ, 11, 1
 1179, +    0-6    , DUMP_SEQ, 29, 1
 1352, +    0-9    , DUMP_ANALOG
 1353, +    0-9    , DUMP_PARAMS
 1355, +    0-15   , DUMP_FPGA_REGS, 0
 1356, +    0-18   , DUMP_FPGA_REGS, 1
 1363, +    0-21   , DUMP_COUNTS