2002-05-03T17:10:19.000 \header System = GRS Author = mward Institution = UofAz Start_time = 05/03/02 17:00 Stop_time = 05/04/02 18:15 Send_time = Fri May 03 17:10:19 GMT 2002 \text Purpose: To prepare GRS for the pre-boom deployment Door Close/HV Ramp Down/Warm Expected result: The thermostatic control of the CEB heater will terminate, and the CEB heater will be turned off. The temperature of the GRS OS will be increased in 5 degree steps from -98C to -83C with 1 hour between each step. The sequence Why it is needed: The CEB heater control must be stopped in order to prevent an undesireable offset in the CEB_ALT_ACTUATOR_CURR during door (close) actuation. The OS temperature must be increased in order to ensure that the GRS OS and IS do not lockup during the initial stages of GSH warmup and to ensure that the GRS OP Commands to be sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_boom_dr_cls_prep_ Usage: CmdParse [-v] [-a] [-b] [-i] [-t uts] [input [output]] -v Output version number and this Usage message -a Output ascii commands: one command per line (default) -b Output binary commands: int len then len words -i Interactive commands: set flag in output -t uts Set the header time in the binary output to uts (Unix Time Seconds) input Input filename, a '-' means stdin, (default=stdin) output output filename, a '-' means stdout, (default=stdout) Sizeof(SocketHdr_t) = 12 Sizeof(CommonHdr_t) = 56 &bhdr.data - &bhdr.endian_flag = 52 (BHDR_SZ=52) Opening input file: No such file or directory 2002-05-03T17:10:19.000 \header System = GRS Author = mward Institution = UofAz Start_time = 05/03/02 17:00 Stop_time = 05/04/02 18:15 Send_time = Fri May 03 17:10:19 GMT 2002 \text Purpose: To prepare GRS for the pre-boom deployment Door Close/HV Ramp Down/Warm Expected result: The thermostatic control of the CEB heater will terminate, and the CEB heater will be turned off. The temperature of the GRS OS will be increased in 5 degree steps from -98C to -83C with 1 hour between each step. The sequence Why it is needed: The CEB heater control must be stopped in order to prevent an undesireable offset in the CEB_ALT_ACTUATOR_CURR during door (close) actuation. The OS temperature must be increased in order to ensure that the GRS OS and IS do not lockup during the initial stages of GSH warmup and to ensure that the GRS OP Commands to be sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_boom_dr_cls_prep_ Usage: CmdParse [-v] [-a] [-b] [-i] [-t uts] [input [output]] -v Output version number and this Usage message -a Output ascii commands: one command per line (default) -b Output binary commands: int len then len words -i Interactive commands: set flag in output -t uts Set the header time in the binary output to uts (Unix Time Seconds) input Input filename, a '-' means stdin, (default=stdin) output output filename, a '-' means stdout, (default=stdout) Sizeof(SocketHdr_t) = 12 Sizeof(CommonHdr_t) = 56 &bhdr.data - &bhdr.endian_flag = 52 (BHDR_SZ=52) Opening input file: No such file or directory 2002-05-03T17:10:19.000 \header System = GRS Author = mward Institution = UofAz Start_time = 05/03/02 17:00 Stop_time = 05/04/02 18:15 Send_time = Fri May 03 17:10:19 GMT 2002 \text Purpose: To prepare GRS for the pre-boom deployment Door Close/HV Ramp Down/Warm Expected result: The thermostatic control of the CEB heater will terminate, and the CEB heater will be turned off. The temperature of the GRS OS will be increased in 5 degree steps from -98C to -83C with 1 hour between each step. The sequence Why it is needed: The CEB heater control must be stopped in order to prevent an undesireable offset in the CEB_ALT_ACTUATOR_CURR during door (close) actuation. The OS temperature must be increased in order to ensure that the GRS OS and IS do not lockup during the initial stages of GSH warmup and to ensure that the GRS OP Commands to be sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_boom_dr_cls_prep_ Usage: CmdParse [-v] [-a] [-b] [-i] [-t uts] [input [output]] -v Output version number and this Usage message -a Output ascii commands: one command per line (default) -b Output binary commands: int len then len words -i Interactive commands: set flag in output -t uts Set the header time in the binary output to uts (Unix Time Seconds) input Input filename, a '-' means stdin, (default=stdin) output output filename, a '-' means stdout, (default=stdout) Sizeof(SocketHdr_t) = 12 Sizeof(CommonHdr_t) = 56 &bhdr.data - &bhdr.endian_flag = 52 (BHDR_SZ=52) Opening input file: No such file or directory 2002-05-03T17:10:19.000 \header System = GRS Author = mward Institution = UofAz Start_time = 05/03/02 17:00 Stop_time = 05/04/02 18:15 Send_time = Fri May 03 17:10:19 GMT 2002 \text Purpose: To prepare GRS for the pre-boom deployment Door Close/HV Ramp Down/Warm Expected result: The thermostatic control of the CEB heater will terminate, and the CEB heater will be turned off. The temperature of the GRS OS will be increased in 5 degree steps from -98C to -83C with 1 hour between each step. The sequence Why it is needed: The CEB heater control must be stopped in order to prevent an undesireable offset in the CEB_ALT_ACTUATOR_CURR during door (close) actuation. The OS temperature must be increased in order to ensure that the GRS OS and IS do not lockup during the initial stages of GSH warmup and to ensure that the GRS OP Commands to be sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_boom_dr_cls_prep_ Usage: CmdParse [-v] [-a] [-b] [-i] [-t uts] [input [output]] -v Output version number and this Usage message -a Output ascii commands: one command per line (default) -b Output binary commands: int len then len words -i Interactive commands: set flag in output -t uts Set the header time in the binary output to uts (Unix Time Seconds) input Input filename, a '-' means stdin, (default=stdin) output output filename, a '-' means stdout, (default=stdout) Sizeof(SocketHdr_t) = 12 Sizeof(CommonHdr_t) = 56 &bhdr.data - &bhdr.endian_flag = 52 (BHDR_SZ=52) Opening input file: No such file or directory 2002-05-03T17:10:19.000 \header System = GRS Author = mward Institution = UofAz Start_time = 05/03/02 17:00 Stop_time = 05/04/02 18:15 Send_time = Fri May 03 17:10:19 GMT 2002 \text Purpose: To prepare GRS for the pre-boom deployment Door Close/HV Ramp Down/Warm Expected result: The thermostatic control of the CEB heater will terminate, and the CEB heater will be turned off. The temperature of the GRS OS will be increased in 5 degree steps from -98C to -83C with 1 hour between each step. The sequence Why it is needed: The CEB heater control must be stopped in order to prevent an undesireable offset in the CEB_ALT_ACTUATOR_CURR during door (close) actuation. The OS temperature must be increased in order to ensure that the GRS OS and IS do not lockup during the initial stages of GSH warmup and to ensure that the GRS OP Commands to be sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_boom_dr_cls_prep_ Usage: CmdParse [-v] [-a] [-b] [-i] [-t uts] [input [output]] -v Output version number and this Usage message -a Output ascii commands: one command per line (default) -b Output binary commands: int len then len words -i Interactive commands: set flag in output -t uts Set the header time in the binary output to uts (Unix Time Seconds) input Input filename, a '-' means stdin, (default=stdin) output output filename, a '-' means stdout, (default=stdout) Sizeof(SocketHdr_t) = 12 Sizeof(CommonHdr_t) = 56 &bhdr.data - &bhdr.endian_flag = 52 (BHDR_SZ=52) Opening input file: No such file or directory 2002-05-03T17:10:19.000 \header System = GRS Author = mward Institution = UofAz Start_time = 05/03/02 17:00 Stop_time = 05/04/02 18:15 Send_time = Fri May 03 17:10:19 GMT 2002 \text Purpose: To prepare GRS for the pre-boom deployment Door Close/HV Ramp Down/Warm Expected result: The thermostatic control of the CEB heater will terminate, and the CEB heater will be turned off. The temperature of the GRS OS will be increased in 5 degree steps from -98C to -83C with 1 hour between each step. The sequence Why it is needed: The CEB heater control must be stopped in order to prevent an undesireable offset in the CEB_ALT_ACTUATOR_CURR during door (close) actuation. The OS temperature must be increased in order to ensure that the GRS OS and IS do not lockup during the initial stages of GSH warmup and to ensure that the GRS OP Commands to be sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bfl/c01grs_boom_dr_cls_prep_ Usage: CmdParse [-v] [-a] [-b] [-i] [-t uts] [input [output]] -v Output version number and this Usage message -a Output ascii commands: one command per line (default) -b Output binary commands: int len then len words -i Interactive commands: set flag in output -t uts Set the header time in the binary output to uts (Unix Time Seconds) input Input filename, a '-' means stdin, (default=stdin) output output filename, a '-' means stdout, (default=stdout) Sizeof(SocketHdr_t) = 12 Sizeof(CommonHdr_t) = 56 &bhdr.data - &bhdr.endian_flag = 52 (BHDR_SZ=52) Opening input file: No such file or directory 2002-05-03T17:10:19.000 \header System = GRS Author = mward Institution = UofAz Start_time = 05/03/02 17:00 Stop_time = 05/04/02 18:15 Send_time = Fri May 03 17:10:19 GMT 2002 \text Purpose: To prepare GRS for the pre-boom deployment Door Close/HV Ramp Down/Warm Expected result: The thermostatic control of the CEB heater will terminate, and the CEB heater will be turned off. The temperature of the GRS OS will be increased in 5 degree steps from -98C to -83C with 1 hour between each step. The sequence Why it is needed: The CEB heater control must be stopped in order to prevent an undesireable offset in the CEB_ALT_ACTUATOR_CURR during door (close) actuation. The OS temperature must be increased in order to ensure that the GRS OS and IS do not lockup during the initial stages of GSH warmup and to ensure that the GRS OP Commands to be sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, sent: /home/grs2001/software/SC_Commands/Post-MOI_1/bce_bcf/c01grs_boom_dr_cls_prep_ 2701, 928-118 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-119 , CEB_HTR, OFF 2701, 928-120 , CHG_ANALOG, CEB_PS2_TEMP, COMPARE_SETTING, 0 1327, 928-121 , CEB_HTR, OFF 2483, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2708 2482, 931-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2712 2442, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2506 2480, 931-298 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2510 2497, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, LESS_COMPARE_VALUE, 2303 2478, 932-118 , CHG_ANALOG, CEB_OS_TEMP_A, GREATER_COMPARE_VALUE, 2307 1041, 932-123 , EXEC_SEQ, 41, 0