2014-03-10T22:57:40.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 22:57:40 GMT 2014
\text
Purpose:
Switch LANL HVPS #2 to #1 at power level 4.
Expected result:
HVPS #2 will be off. HVPS #1 will be on at power level 4.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
Previous experiments setting the HVPS#2 power level at 3 and then back to 4
failed to satisfactorily remedy this problem.  The next step is to try to use
Commands to be sent:
/home/agardner/commands/hvps2_to_hvps1/c01grs_lanl_switch_from_hvps2_to_hvps1_
 1829,    immediate, LANL_HVPS, 2, OFF
 1814,    immediate, LANL_HVPS_CNTL, 1, 4
 1818, +    0-1    , LANL_HVPS, 1, ON

2014-03-10T22:57:40.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 22:57:40 GMT 2014
\text
Purpose:
Switch LANL HVPS #2 to #1 at power level 4.
Expected result:
HVPS #2 will be off. HVPS #1 will be on at power level 4.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
Previous experiments setting the HVPS#2 power level at 3 and then back to 4
failed to satisfactorily remedy this problem.  The next step is to try to use
Commands to be sent:
/home/agardner/commands/hvps2_to_hvps1/c01grs_lanl_1_switch_from_hvps2_to_hvps
 1829,    immediate, LANL_HVPS, 2, OFF
 1814,    immediate, LANL_HVPS_CNTL, 1, 4
 1818, +    0-1    , LANL_HVPS, 1, ON

2014-03-10T22:57:40.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 22:57:40 GMT 2014
\text
Purpose:
Switch LANL HVPS #2 to #1 at power level 4.
Expected result:
HVPS #2 will be off. HVPS #1 will be on at power level 4.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
Previous experiments setting the HVPS#2 power level at 3 and then back to 4
failed to satisfactorily remedy this problem.  The next step is to try to use
Commands to be sent:
/home/agardner/cmd/hvps2to1/c01grs_lanl_1_hvps_2to1_l4.bcf
 1829,    immediate, LANL_HVPS, 2, OFF
 1814,    immediate, LANL_HVPS_CNTL, 1, 4
 1818, +    0-1    , LANL_HVPS, 1, ON

2014-03-10T22:57:40.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 22:57:40 GMT 2014
\text
Purpose:
Switch LANL HVPS #2 to #1 at power level 4.
Expected result:
HVPS #2 will be off. HVPS #1 will be on at power level 4.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
Previous experiments setting the HVPS#2 power level at 3 and then back to 4
failed to satisfactorily remedy this problem.  The next step is to try to use
Commands to be sent:
/home/agardner/commands/hvps2_to_hvps1/c01grs_lanl_switch_from_hvps2_to_hvps1_
 1829,    immediate, LANL_HVPS, 2, OFF
 1814,    immediate, LANL_HVPS_CNTL, 1, 4
 1818, +    0-1    , LANL_HVPS, 1, ON

2014-03-10T22:58:45.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 22:58:45 GMT 2014
\text
Purpose:
Switch HVPS#1 power to level 3.
Expected result:
HVPS #1 will be on at power level 3.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
Previous experiments setting the HVPS#2 power level at 3 and then back to 4
failed to satisfactorily remedy this problem.  The next step is to try to use
Commands to be sent:
/home/agardner/cmd/hvps2to1/c01grs_lanl_2_hvps_2to1_l3.bcf
 1813,    immediate, LANL_HVPS_CNTL, 1, 3

2014-03-10T22:58:45.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 22:58:45 GMT 2014
\text
Purpose:
Switch HVPS#1 power to level 3.
Expected result:
HVPS #1 will be on at power level 3.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
Previous experiments setting the HVPS#2 power level at 3 and then back to 4
failed to satisfactorily remedy this problem.  The next step is to try to use
Commands to be sent:
/home/agardner/commands/hvps2_to_hvps1/c01grs_lanl_switch_from_hvps2_to_hvps1_
 1813,    immediate, LANL_HVPS_CNTL, 1, 3

2014-03-10T23:00:22.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 23:00:22 GMT 2014
\text
Purpose:
Switch back to HVPS#2 at level 3.
Expected result:
HVPS #1 will be off. HVPS #2 will be on at power level 3.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
If experiments with HPVS#1 at levels 3 and 4 are not successful, the best
Commands to be sent:
/home/agardner/cmd/hvps2to1/c01grs_lanl_3a_hvps_1to2_l3.bcf
 1819,    immediate, LANL_HVPS, 1, OFF
 1823,    immediate, LANL_HVPS_CNTL, 2, 3
 1828, +    0-1    , LANL_HVPS, 2, ON

2014-03-10T23:00:22.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 23:00:22 GMT 2014
\text
Purpose:
Switch back to HVPS#2 at level 3.
Expected result:
HVPS #1 will be off. HVPS #2 will be on at power level 3.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
If experiments with HPVS#1 at levels 3 and 4 are not successful, the best
Commands to be sent:
/home/agardner/cmd/hvps2to1/c01grs_lanl_3_hvps_1to2_l3.bcf
 1819,    immediate, LANL_HVPS, 1, OFF
 1823,    immediate, LANL_HVPS_CNTL, 2, 3
 1828, +    0-1    , LANL_HVPS, 2, ON
2014-03-10T23:00:22.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 23:00:22 GMT 2014
\text
Purpose:
Switch back to HVPS#2 at level 3.
Expected result:
HVPS #1 will be off. HVPS #2 will be on at power level 3.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
If experiments with HPVS#1 at levels 3 and 4 are not successful, the best
Commands to be sent:
/home/agardner/cmd/hvps2to1/c01grs_lanl_3_hvps_1to2_l3.bcf
 1819,    immediate, LANL_HVPS, 1, OFF
 1823,    immediate, LANL_HVPS_CNTL, 2, 3
 1828, +    0-1    , LANL_HVPS, 2, ON
Contingency
2014-03-10T23:00:22.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/11/2014 15:25
Stop_time            = 03/11/2014 16:55
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Mon Mar 10 23:00:22 GMT 2014
\text
Purpose:
Switch back to HVPS#2 at level 3.
Expected result:
HVPS #1 will be off. HVPS #2 will be on at power level 3.
Why it is needed:
Analysis of data from MONS indicates that a recent drop in MONS HV may be
causing data peaks to fall too close to the analog electronics cut off points.
If experiments with HPVS#1 at levels 3 and 4 are not successful, the best
Commands to be sent:
/home/agardner/commands/hvps2_to_hvps1/c01grs_lanl_switch_from_hvps1_to_hvps2_
 1819,    immediate, LANL_HVPS, 1, OFF
 1823,    immediate, LANL_HVPS_CNTL, 2, 3
 1828, +    0-1    , LANL_HVPS, 2, ON
Contingency