2015-12-03T17:52:17.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/18/2015 15:20
Stop_time            = 03/18/2015 17:45
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Thu Dec 03 17:52:17 GMT 2015
\text
Purpose:
Dump the contents of init sequences 7 and 9.
Expected result:
Sequence contents in telemetry output.
Why it is needed:
Verify the contents of the init sequences.
Commands to be sent:
/home/agardner/cmd/2015-03-12/2/c01grs_2015G_dump_sequences_7_9.bcf
    0,    immediate, DUMP_SEQ, 7, 1
    1, +        40 , DUMP_SEQ, 9, 1
2015-12-03T17:52:17.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/18/2015 15:20
Stop_time            = 03/18/2015 17:45
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Thu Dec 03 17:52:17 GMT 2015
\text
Purpose:
Unlock EEPROM on the spacecraft B-side.
Expected result:
Telemetry reports command executed successfully.
Why it is needed:
Have to unlock EEPROM B-side before writing to it.
Commands to be sent:
/home/agardner/cmd/2015-03-12/2/c01grs_2015H_Bside_wpr_off.bcf
 1210,    immediate, CHG_PARAM, EEPROM_SIDEB_WRITE, 9611
 1209,    immediate, EEPROM_EN_DIS, 1, Disable
2015-12-03T17:52:17.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/18/2015 15:20
Stop_time            = 03/18/2015 17:45
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Thu Dec 03 17:52:17 GMT 2015
\text
Purpose:
Dump the contents of init sequences 7 and 9.
Expected result:
Sequence contents in telemetry output.
Why it is needed:
Verify the contents of the init sequences.
Commands to be sent:
/home/agardner/cmd/2015-03-12/2/c01grs_2015L_dump_sequences_7_9.bcf
    0,    immediate, DUMP_SEQ, 7, 1
    1, +        40 , DUMP_SEQ, 9, 1
2015-12-03T17:52:17.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/18/2015 15:20
Stop_time            = 03/18/2015 17:45
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Thu Dec 03 17:52:17 GMT 2015
\text
Purpose:
Upload new init sequence 9.
Expected result:
Telemetry reports command executed successfully.
Why it is needed:
Change power supply select and power level select in initialization sequence
Commands to be sent:
/home/agardner/cmd/2015-03-12/2/c01grs_2015J_s09b_lanl_hv_init.bfl
 3109,    immediate, CHG_SEQ, 108, B-9, 9
 0:    immediate, EXEC_SEQ, 15, 0, 0
 1: +        20 , CHG_PARAM, SEND_LANL_REGS, 1, 0
 2: +        20 , CHG_STATE, LANL, ON, 0
 3: +        20 , CHG_CLCT, LANL, ON, 0
 4: +        40 , LANL_RUN, ON, 0
 5: +        80 , LANL_ALL_PRISM, 0, 0
 6: +        80 , LANL_HVPS_CNTL, 2, 4, 0
 7: +        80 , LANL_HVPS, 2, ON, 0
 8: +       100 , LANL_SWAP, ON, 0
2015-12-03T17:52:17.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/18/2015 15:20
Stop_time            = 03/18/2015 17:45
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Thu Dec 03 17:52:17 GMT 2015
\text
Purpose:
Restore write protection to EEPROM B-side.
Expected result:
Telemetry reports command executed successfully.
Why it is needed:
Limiting the time the EEPROM write protection is disabled.
Commands to be sent:
/home/agardner/cmd/2015-03-12/2/c01grs_2015K_Bside_wpr_on.bcf
 1210,    immediate, CHG_PARAM, EEPROM_SIDEB_WRITE, 9611
 1208,    immediate, EEPROM_EN_DIS, 1, Enable

2015-12-03T17:52:17.000
\header
System               = GRS
Author               = agardner
Institution          = UofAz
Start_time           = 03/18/2015 15:20
Stop_time            = 03/18/2015 17:45
Target               = M01
Email_address        = asg@lpl.arizona.edu
Send_time            = Thu Dec 03 17:52:17 GMT 2015
\text
Purpose:
Upload new init sequence 7.
Expected result:
Telemetry reports command executed successfully.
Why it is needed:
Add anticoincidence setting to init sequence from HEND.
Commands to be sent:
/home/agardner/cmd/2015-03-12/2/c01grs_2015I_s07b_hend_init.bfl
 3107,    immediate, CHG_SEQ, 72, B-7, 6
 0:    immediate, CHG_CLCT, HEND, ON, 0
 1: +        40 , CHG_HEND_STATUS, 3, ON, 0
 2: +        80 , HEND_CMD, Triggering Logic, OR, 0, 0
 3: +       120 , HEND_CMD, Triggering, C2 Allow, 32, 0
 4: +       160 , HEND_CMD, Discriminator5 (Outer), 3, 0
 5:    immediate, HEND_CMD, Anticoincidence, 0 0 0, 0